Request For Quote

Control Cable

FR-EPR/CPE Tray Cable – Unshielded (31)

FR-EPR/CPE - Unshielded 600 Volt, UL Type TC-ER (Approved as TYPE TC-ER for Exposed Run applications of 3 or more conductors as defined by NEC.)Dimensions and weights are nominal; subject to industry tolerances.

Neoprene Flat Festoon Cable -50°C TO 90°C - UL AND CSA - 600V (16)

Applications:

  • Primarily designed for use with festoon systems for the conveyance of electrical power and control to cranes, hoists, or any equipment which travels with a lateral transversing motion. Festoon Cables can also be used where space is at a premium, since it can be stacked or where extreme flexing is a requirement, recommended bend radius of three to five times cable diameter. Neoprene Festoon Cables are suitable for either indoor or outdoor applications operating at -50°C to 90° C.Features:
  • Easy stripping.
  • Easy stacking of multiple cables in smaller space.
  • Enhanced stability in outdoor applications against crosswinds.
  • Maintains cable integrity.
  • Reduces conductor stress and increases ...
    • NVN-THHN Tray Cable (Unshielded) Thermosetting Jacket, 600V, UL LISTED 90°C DRY 75°C WET (49)

    Description:

  • Stranded bare copper conductors, color-coded vinyl insulation jacketed with nylon, conductors cabled with non-wicking fillers (as required), cable tape heavy duty black, sunlight resistant thermosetting jacket overall.Applications:
  • Ideal for installations with tight space requirements, NVN®-THHN. Flexible cables can be used for control circuits in locations such as shipyards, port facilities, steel mills, paper, cement, glass, textile, chemical and petroleum plants.Typical Applications:
  • Tight installations.
  • Tray, conduit and raceways.
  • Cranes and hoists.
  • Pendant stations.
  • Load lifts and platforms.
  • Messenger systems.
  • Direct burial.
  • Stage lighting.
    • Pendent and Reel Cable- TYPE SOW-A, 90°C 600V (22)
  • Pendant and Reel Control Cable is designed and manufactured for use in continuous flexing applications where flame, abrasion, chemicals, moisture, impact, tearing, and temperature extremes are considerations. Applications include portable control, festoon systems, power tracks, cable tenders, cranes and hoists, aerotracks, power carriage systems, cable reels, retractable reels, automatic welders, transfer vehicles, and other abusive flexing applications. Cables are suitable for use indoors or outdoors.
    • Pendent and Reel Cable- Type STOW-A, 105°C 600V UL & CSA (12)
  • Portable control.
  • Festoon systems.
  • Pendant stations.
  • Power tracks.
  • Cranes and hoists.
  • Power carriage systems.
  • Cable reels.
  • Retractable reels and other flexible applications.Features:
  • Cable is designed to provide maximum flex-life under the most demanding continuous flexing condition where flame, chemicals, moisture and temperature extremes are considerations
    • PVC Flat Festoon Cable -40°C TO 105°C - UL AND CSA (22)

    Applications:

  • Primarily designed for use with festoon systems for the conveyance of electrical power and control to cranes, hoists, or any equipment which travels with a lateral traversing motion. Cables can also be used where space is at a premium, since it can be stacked; or where extreme flexing is a requirement, recommended bend radius of three to five times cable diameter. PVC Festoon Cables are suitable for either indoor or outdoor applications operating at -40° C to 105° C. However, they are not recommended for severe flexing or impact at temperatures below -10° C. For severe flexing applications below -10° C specify Neoprene Festoon Cables.
  • Five conductor black PVC cables are widely used in convention ...
    • TFFN Tray Cable - Unshielded, Type TC 90° C Dry - 75° C Wet - NEC® Article 340 - 600V (37)

    For use in conduit, duct, tray or rack. It may be used in free air when supported by a messenger or for direct burial. Its small diameter facilitates installation and conserves space. It may be installed in cable trays in accordance with Articles 318, 340, and 725 of the NEC. It may be used in Class I, Div. II hazardous locations as allowed under Articles 318, 340 and 501. It is a Class I Cable as defined by Articles 725 and 760.

    THHN Tray Cable- Shielded-TYPE TC 90°C Wet, PVC/NYLON INSULATION - PVC JACKET- 600V (42)

    Description:

  • Color coded polyvinyl chloride (PVC) Insulation with overall Nylon Sizes. 18 and 16 AWG are rated TFFN, Sizes 14, 12 and 10 are rated VN-THHN/THWN.
  • Conductors are cabled with fillers as needed.
  • Polyester binder tape.
  • Aluminum Mylar shield (100% coverage).
  • Stranded copper drain wire.
  • Black Polyvinyl Chloride (PVC) jacket.Applications:
  • For use in class 1, Division 2 Hazardous locations.
  • For installation in trays, wireways, ducts, conduit and aerially when properly supported by a messenger.
  • Approved for direct burial, wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required.
    • THHN Tray Cable- Unshielded, TYPE TC 9°0C DRY - 75°C WET - NEC® ARTICLE 340 - 600V (42)

    Suitable for use in conduit, duct, tray or rack. It may be used in free air when supported by a messenger or for direct burial. Its small diameter facilitates installation and conserves space. It may be installed in cable trays in accordance with Articles 318, 340, and 725 of the NEC. It may be used in Class I, Div. II hazardous locations as allowed under Articles 318, 340 and 501. It is a Class I Cable as defined by Articles 725 and 760.

    UL 1277 Tray Cable- 2 Conductor (8)
  • Stranded tinned copper, each conductor has PVC insulation with nylon jacket, conductors cabled, Black PVC jacket overall.
  • Aluminum Mylar shield (100% coverage).
  • Stranded copper drain wire.
    • XHHW HYP Tray Cable-With Hypalon Jacket, TYPE TC, 90°C WET AND DRY, Shielded and Unshielded, 600V (84)

    UL listed and OSHA acceptable.

  • Recognized for use in Class 1, Division 2 hazardous locations and for installation in trays, wireways, troughs, channels, ducts, conduit and aerially where supported by a messenger.
  • Specifically approved for direct burial, wet and dry locations and outdoors in cable trays where a sunlight resistant rating is required.
  • Designed for control, power, lighting, telemetering, signal and relay or traffic control where a low loss high temperature insulation is specified.
    • XHHW-2 Tray Cable Unshielded TYPE TC 90°C WET & DRY - 600V (54)

    Control applications where cable is used in conduit, ducts, trays or racks. It can also be used in free air when supported by a messenger or for direct burial. Can be installed in cable trays per NEC Articles 318, 340 and 501.

    XHHW-2/CPE Tray Cable – Unshielded (31)

    Type TC CPE Jacket 90ºC, Wet or Dry, 600 Volt

    Flexible Construction

    Control cables are popularly used on assembly lines and in robotics. When searching for the control cable that will work best for you, there are many things to consider. We offer a wide variety of quality brands that are constructed to be durable yet flexible; appropriate for tight fits, even under stressful operations. Our selection includes multiple options in conductor counts and size. If we do not have what you need, no worries, we can customize all control cables to get them just the way you want them. No matter your industry, we offer control cables that will help you reap the benefits of your equipment for many years to come, using only the most reliable materials and quality manufacturing.

    Just In Time Delivery

    Custom Cable Corp will customize your control cables and get them to you on time. For additional information on our control cable products or our custom products call (888) 813-6768.

     

    Subscribe to RSS - Control Cable