Construction
Conductor:
- Fully annealed class B copper per ASTM B-3 and ASTM B-8 or B-787.
Insulation:
- Color coded PVC(polyvinyl chloride) with a nylon jacket per UL 83 for Type THHN/THWN.
Conductor Identification:
- Base colored insulation black and red.
Bare Conductor:
- Uninsulated concentric neutral served around paralled phase conductors.
Tape:
- Fiberglass reinforced binder tape.
Jacket:
- Gray PVC (polyvinyl chloride).
Application:
- Above ground service entrance and branch circuit.
- Maximum operating temperature of phase conductors not to exceed 90°C for dry locations or 75°C for wet locations.
- 600 volts, approved for use as specified by the NEC®.
Features:
- Color coded phase conductors.
- Full or reduced neutral constructions.
- Fiberglass reinforced tape under the outer jacket.
- Sunlight and moisture resistant, flame retardant jacket.
Industry Approvals:
- UL Standard 854.
- Federal Specification JC-30B
- NEC® Articles 230, 310 and 338 (NFPA 70).
Packaging:
