15286, Service Entrance Type SE, Style U- Copper, 600V, 3/2 Get a Quote Today

Construction

Conductor:

• Fully annealed class B copper per ASTM B-3 and ASTM B-8 or B-787.

Insulation:

• Color coded PVC(polyvinyl chloride) with a nylon jacket per UL 83 for Type THHN/THWN.

Conductor Identification:

• Base colored insulation black and red.

Bare Conductor:

• Uninsulated concentric neutral served around paralled phase conductors.

Tape:

• Fiberglass reinforced binder tape.

Jacket:

• Gray PVC (polyvinyl chloride).

Application:

• Above ground service entrance and branch circuit.
• Maximum operating temperature of phase conductors not to exceed 90°C for dry locations or 75°C for wet locations.
• 600 volts, approved for use as specified by the NEC®.

Features:

• Color coded phase conductors.
• Full or reduced neutral constructions.
• Fiberglass reinforced tape under the outer jacket.
• Sunlight and moisture resistant, flame retardant jacket.

Industry Approvals:

• UL Standard 854.
• Federal Specification JC-30B
• NEC® Articles 230, 310 and 338 (NFPA 70).

Packaging:

• 500 ft. reels