9541, XHHW-2 Tray Cable Unshielded TYPE TC 90°C WET & DRY - 600V, 14 Get a Quote Today
Construction
Conductors:
- Stranded soft bare copper.
Insulation:
- Concentric layer of 90°C cross linked polyethylene (XLP). This XLP compound is specially formulated to provide excellent electrical and physical properties. Each insulated conductor passes the UL VW-1 vertical flame test.
Color Code:
- The individual conductors are color coded in accordance with ICEA Table K-2.
Cabling:
- The specified number of conductors are cabled with fillers where needed and a suitable tape is applied over the assembly. Two-conductor cables are flat parallel design.
Overall Jacket:
- A heavy-duty polyvinyl chloride (PVC) sheath to meet the requirements of UL Class-12 is applied over the assembled core.
Application:
- Control applications where cable is used in conduit, ducts, trays or racks. It can also be used in free air when supported by a messenger or for direct burial. Can be installed in cable trays per NEC Articles 318, 340 and 501.
Features:
- Moisture and sunlight resistant.
- Meets UL 1277 flame tray test with 70,000 BTU flame source.
- Rated 90°C Dry, 75°C Wet, 600 volt.
- UL Listed as type TC and for aerial use and direct burial.
- Insulated conductors are XHHW-2 type and pass VW-1 flame test
- Meets appropriate sections of NEC Articles 318, 340 and 501.
Meets NEC:
- Article 318 for Cable Tray Installations.
- Article 340 for Cable Construction.
- Article 501 for Class 1, Div. 2 Hazardous Locations.
Attribute | Value |
---|---|
Item # | 9541 |
Item Name | XHHW-2 Tray Cable Unshielded TYPE TC 90°C WET & DRY - 600V |
Size (AWG/MCM) | 14 |
No. of Conductors | 3 |
Nominal Weight(LBS/MFT) | 100 |