Telephone Cable
Designed for use in duct, aerial or direct burial in either exchange area service or truck service. The core is filled with an 80° C filling compound and the sheath interfaces are flooded with a flooding compound. The polymer coating provides additional corrosion protection for the aluminum shield.
UL Listed Type CMP - c(UL) CMP - NEC Article 800 - 300 Volt
UL Listed Type CM - NEC Article 800 - 300 Volt
Designed for use as a duct or direct burial cable in either exchange area service or truck service.
Direct burial telephone cable with black polyethylene outer jacket.
Direct burial telephone cable with black polyethylene outer jacket.
Solid Soft drawn annealed bare copper with Polyolefin insulation. Shielding is a corrosion/oxidation resistant, blue tinted ethylene copolymer coated (on both sides) overlapping 0.008 inch thick corrugated aluminum tape shield applied longitudinally overall to provide 100% electrical shielding coverage.
Solid Soft drawn annealed bare copper with Polyolefin insulation. Messenger Strand is a 1/4 inch diameter 7 wire Extra High strength (6.650lb. test strength) galvanized steel messenger strand is integrated within the outer jacket in a "figure 8" configuration. Black polyethylene jacket compounded to withstand sunlight, temperature variations and other environmental conditions, including abuse during installation.
DescriptionThe two and three conductor wire conductors are twisted together, forming a paired and triple assembly, respectively. The four conductor wire is made by twisting the four conductors together forming a star quad configuration. Conductors 1 (red) and 2 (green) are place diagonally across from each other to form pair one. The 3rd (yellow) and 4th (black) conductors form pair two.
Advantages:
